Rotor Stator 2L6 with integrated clamp

Rotor Stator 2L6 with integrated clamp

This variation of the 2L6 rotor stator pump has an adjustable stator. The clamping between the rotor and the stator can be increased through tightening the screws. The advantage of this version is that no additional external clamp is neccessary. If you notice a decrease in your pumps performance that is caused by the natural deterioration of the rotor and stator, you can simply tighten the screws of the integrated clamp.

This pump also works with the same rotor as the slotted and maintenance free 2L6 Stators. The dimensions of the 2L6 Stator with integrated clamp are identical with the slotted stator.

Be patient with the integrated clamp on the 2L6 Stator

Don't expect an immediate change in performance after adjusting the clamp. It can take up to two minutes until you recognize that the material is coming out of the nozzle with more pressure. So don't immediatly tighten the screws further again, because of you do you decrease the stators lifetime.

The 2L6 rotor stator can be used with different machines and materials

The integrated clamp version of the 2L6 rotor stator can be used with a number of different machines, such as the S5 or the SP11. It conveys different materials, such as mortar, screed, grout, cement or refractory material.