m-tec Duo Mix 2000 Spare Parts
ローター D6-3 エコ 高合金工具鋼
ドイツ製。 メンテナンスフリー 円筒形ステーター チューブ:Ø 89 mm 長さ:270 mm ゴムの品質:CB 73 色:グリーン
D5-2.5 ECOスクリューポンプ用のステーター ドイツ製。 D5-2.5 ECOステーターに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 最大粒径: 3 mm ローター: D5-2.5 ECOローター ステーター ...
詳細を全部見るローター のための スクリューポンプ D5-2.5 ECO ドイツ製。 D5-2.5 ECOローターに関する技術情報 ローター材質: 高合金工具鋼 ローターデザイン: スリット付き。 ステーター: D5-2.5 ステーター 購入する D5-2.5 ECOセット.
ローターステーターは、D5-2.5と間違えないように、D PumpファミリーのD5-2.5 ECOとして知られる部品です。 ドイツ製。 についての技術情報 D5-2.5 ECO セット ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 最...
詳細を全部見るスクリューポンプ D8-1.5用のクランプ一体型ステーターです。 ドイツ製。 についての技術情報 D8-1.5 ステーター ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量(@ 400 I 200 RPM): 38 l/min I 19...
詳細を全部見るローターはスクリューポンプ D8-1.5用です。 ドイツ製。 D8-1.5 ローターに関する技術情報 ローター材質:高合金工具鋼または鋳鉄 ステーター: D8-1.5 ステーター ローターは特に指定がない限り鋳鉄製です。 お問い合わせ 高合金工具鋼D8-1.5ローターの見積もりについて...
詳細を全部見るのステーター スクリューポンプ D7-2.5。 ドイツ製。 についての技術情報 D7-2.5 ステーター ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量 (@ 400 I 200 RPM): 25 l/min I 12 l/min ...
詳細を全部見るスクリューポンプ UE 45/7用のステーターです。 UE 45/7は2種類のゴムで提供しています。60ショアは比較的柔らかいです。より硬いゴムを好む場合は、イエローのUE 45/7を選んでください。 UE 45/7の技術情報tator ステーター直径: 127 mm ステーター長さ:...
詳細を全部見るローターは スクリューポンプ UE 45/7用です。 UE 45/7 ローターに関する技術情報tor ローター素材:高合金工具鋼 ステーター: ステーター UE 45/7 ローターヘッドのデザインはスリット付きです。 UE45/7ステーターには異なるゴム品質の2つのバージョンがあり...
詳細を全部見るローター・ステーターセット R7-1.5 (R7-1,5) は、スクリーディングおよびショットクリートに使用されるポンプです。 ドイツ製。 についての技術情報 R7-1.5 セット ステーター直径: 114.3 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore ...
詳細を全部見るローター D 4-3、時計回りの回転
ステーター TWISTER D 4-3 PIN、時計回りの回転
このステーターはスクリューポンプ R7-1.5 (R7-1,5)用です。 ドイツ製。 についての技術情報 R7-1.5 ステーター ステーター直径: 114.3 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量(400 I 200 RPM時): 60 l...
詳細を全部見るステーター スクリューポンプ D5-Long用。これはステーター長350mmのD5のロングバージョンです。 ドイツ製。 D5ロングステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 350 mm ゴムの品質: 63ショア 流量(@ 400 I 200 RPM): ...
詳細を全部見るローター スクリューポンプ D5-ロング用。ステーター長350mmのD5のロングバージョンです。 ドイツ製。 D5 ロングローターに関する技術情報 ローター材質: 高合金工具鋼 ステーター: D5 ロングステーター 購入する D5-ロングセット
ローター for スクリューポンプ D5 Short。 ドイツ製。 D5 Short ローターに関する技術情報 材質: 高合金工具鋼 ステーター: D5 Short ステーター 購入する D5 Short セット。
ステーター スクリューポンプ D5ショート。 ドイツ製。 D5ショートステーターに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量(@ 400 I 200 RPM): 38 l/min I 19 l/min 最大粒...
詳細を全部見るスクリューポンプ D7-2.5用ローター。 ドイツ製。 D7-2.5 ローターの技術情報 ローター材質:高合金工具鋼または鋳鉄 ステーター: D7-2.5 ステーター 指定がない場合、D7-2.5 ローターは鋳鉄製です。 お問い合わせ 高合金工具鋼について。 購入はこちら:D7-2.5...
詳細を全部見るステーター こちらはD6-3 \"Drill\"セット用です。 ドイツ製。 D6-3 \"Drill\" ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量 (@ 400 I 200 RPM): 20 l/...
詳細を全部見るステーター for スクリューポンプ D4-1/1 ドイツ製。 D4-1/1 ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量 (@ 400 I 200 RPM): 25 l/min I 12 l/min 最大粒径:...
詳細を全部見るローター for スクリューポンプ D4-1/1 ドイツ製。 D4-1/1 ローターの技術情報 材質: 高合金工具鋼 ステーター: D4-1/1 ステーター 購入する D4-1/1 セット
ローター スクリューポンプ D4-1/2。 ドイツ製。 D4-1/2 ローターに関する技術情報 材質: 高合金工具鋼 ステーター: D4-1/2 ステーター 購入する D4-1/2 セット。
ステーター for スクリューポンプ D4-1/2。 2つのステーターオプション:クランプ一体型のグレーまたはメンテナンスフリーのグリーン。 ドイツ製。 D4-1/2 ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore ...
詳細を全部見るローター for スクリューポンプ D4-1/4。 ドイツ製。 D4-1/4 ローターに関する技術情報 材質: 高合金工具鋼 ステーター: D4-1/4 ステーター 購入する D4-1/4 セット。
ステーター for スクリューポンプ D4-1/4。 D4-1/4 ステーターには2つのバリエーションがあります:クランプ一体型の黒色またはメンテナンスフリーの青色。 ドイツ製。 についての技術情報 D4-1/4 ステーター ステーター直径: 89 mm ステーター長さ: 270 mm...
詳細を全部見るステーター for スクリューポンプ D6-2. ドイツ製。 D6-2ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 200 mm ゴムの品質: 73 Shore 流量 (@ 400 I 200 RPM): 20 l/min I 10 l/min 最大粒...
詳細を全部見るステーター はスクリューポンプ D8-2用です 統合クランプ付きまたはメンテナンスフリー D8-2の適用分野: 溝付きグレーティング、滑らかなグレーティング、および特殊な仕上げ材。 ドイツ製。 統合クランプ付きD8-2ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 2...
詳細を全部見るローター 400RPMでのスループット (l/min): 60 粒度 (mm): 5
ステーター スクリューポンプ D5-2.5 (D5-2,5)用。 適用分野:石膏プラスター、石灰石膏プラスター、下塗りモルタル、軽量モルタル。 ドイツ製。 D5-2.5 ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 ショア ...
詳細を全部見るローター for スクリューポンプ D5-2.5 (D5-2,5)。 適用分野:石膏プラスター、石灰石膏プラスター、下塗りモルタル、軽量モルタル。 ドイツ製。 についての技術情報 D5-2.5 ローター 材質: 高合金工具鋼 ステーター: D5-2.5 ステーター 購入する D5-2....
詳細を全部見るThe m-tec Duo Mix 2000 is a mixing pump for all pumpable dry mortars, plasters and screeds up to 4 mm grain. Here you find its spare and wear parts: every D-series rotor stator and the UE 45/7, the mixing tube, mixing coils and shafts, conveyor screws, the pump end piece, water fittings and the electrical parts down to the MCU control unit. Most m-tec parts carry the original m-tec part number, so you can check them against your machine's parts list.
Not sure which part you need? Send us the serial number of your Duo Mix and a photo of the old part, and we'll confirm it before you order. Contact our team.
Crafted with meticulous attention to detail, ensuring durability, reliability, and top-tier performance
We offer bulk discounts on large quantities and special pricing for distributors and machine manufacturers
Our team is committed to providing you with personalized assistance every step of the way, from purchase to aftercare.
Frequently Asked Questions About m-tec Duo Mix 2000 Spare Parts
Which rotor stator fits the m-tec Duo Mix 2000?
Are these original m-tec parts?
How do I find the right part number for my Duo Mix 2000?
Can the Duo Mix 2000 be used as a continuous mixer?
Do you ship Duo Mix parts outside Germany?
Are the prices net?
Rotor stators for the m-tec Duo Mix 2000
The Duo Mix 2000 leaves the factory with the m-tec Star pump, good for about 22 l/min. It also takes every D-series rotor stator and the UE 45/7. The pump sits at the end of the mixing coil and decides the output and the material you can convey.
- D4-1/2 and D4-1/4: lower output, for fine products and precise work.
- D6-3: the most common plaster pump, also as "Drill", ECO and PFT Twister versions.
- D8-2, D7-2.5: in between.
- D8-1.5: higher output, less pressure.
- UE 45/7: for flowing screed and high volumes.
Depending on the pump, the machine covers roughly 5-60 l/min. Two things to know before you switch size: D4 stators need the m-tec change flange 608529, the UE 45/7 needs the replacement flange 608554 and the pump end piece 606725, and the R7-1.5 needs flange 608555 and pump end piece 607725. Buy the rotor and stator as a set, or just the part that is worn. Not sure which size suits your material? Tell us what you pump and we'll recommend one.
Spare parts for every assembly of the Duo Mix 2000
- Mixing: the long mixing pipe (m-tec 605028), the short mixing pipe with rubber seals (608572) and its seal set (608549), the mixing shaft with coil (608505/001), the pump mixing coil Intensive II (607042), the PU mixing shaft bearing (545061/001) and the bearing sleeve (608587).
- Pump end: conveyor screws pitch 50 and 90 with closed lamellae (605096, 605098), the pump end piece with M35 coupling and connecting rod (606016), the transfer chamber (608569) and the hose pressure manometer (607014).
- Motor: motor coupling (601168), fan cover and fan hood (560133, 605162).
- Water: flow meter 160-1600 l/h (561268), fine regulating valve (546693), solenoid valve 24V DC (601040), pressure monitor 2.2 bar (607054), manometers 0-4 and 0-16 bar, the sieve chamber plug for the pressure reducer (561207), hose clamps and the dirt trap.
- Compressed air: the V-MEKO 400 compressor and the pressure switch.
- Electrics and controls: MCU control unit, dual push button with signal lamp (574033), push button (574045), film potentiometer 10 k and holder (565593, 608544), m-tec sensor (605248), magnetic switch with cable (565658), connecting cable for the air pressure controller (608079), circuit breaker B16A (570011), PE terminal (548249), main switch, socket and the control cabinet key.
- Tools: the turning tool from the machine's scope of supply (550255).
Many of these parts are shared with the earlier duo-mix and the duo-mix-SI. The numbers in brackets are the m-tec ordering numbers from the official parts list.
Wear parts to keep in stock
On a mixing pump, the parts that wear fastest touch the material: the stator and rotor, mixing coils and shafts, the conveyor screw and the seals. How fast depends on the material. Coarse, abrasive plasters and screeds wear them much faster than fine products. If your Duo Mix 2000 runs every day, a spare stator, a mixing coil and a set of seals on the van can save a day on site.
About the m-tec Duo Mix 2000
The m-tec Duo Mix 2000 mixes in two stages: the dry material is fed into standing water rather than sprayed, which gives an even mix even with difficult products. It handles plaster, render, bricklaying and adhesive mortar, insulating plaster and flowing screed, and can be converted into a continuous mixer with the long mixing tube or into a mortar pump for paste materials. The 2000 version adds a flowchart control with error code display. For all other m-tec machines, see our m-tec collection.
YOU HAVE A QUESTION?
Contact us
Write to us if you have any questions or inquiries. We are also happy to assist you with technical questions.