Putzmeister MP 25 Spare Parts
張力アンカー付き圧縮フランジ 圧縮フランジには、2つの張力アンカーとダブルコネクターが含まれています。もちろん個別の部品も購入可能ですが、ユニット全体を交換する必要がある場合はこのセットが最適です。圧力フランジは1と1/4インチのねじがあり、すでにダブルねじ付きパイプが取り付けられています。張...
詳細を全部見るミキシングスパイラル MP 25 ダブルスパイラル
水流量計 300-1100 l/h オリジナル Putzmeister 交換部品 205945009
MP25やMSX機のような機械用のブレーキ付きホイール。 寸法:250x70x290 mm
MP25およびMSX用ダブルプッシュボタン プレスボタンスイッチ、プラグ、および保護キャップで構成された完全なダブルプッシュボタン。 MP25とMSXの両方でこのボタンを使用します。ボタンがすり減ってしまった場合は、新しいものと交換するだけで、スプレーマシンを問題なく起動できます。
MP 25用クリーニングシャフトの技術情報 長さ: 460 mm
ブッシュインサート 6P 16A オリジナルプッツマイスター交換部品 419551
コンプレッサー用ハウジング オリジナルプッツマイスター交換部品 493532
デルタコンプレッサー用オリフィス オリジナルプッツマイスター交換部品 493527
接続ケーブル用ピンインサート Putzmeister 交換部品 419555
MP 25用
オリジナルのプッツマイスター MP25 ミキシングシャフト / ミキシングスパイラル 211773003
MP 25およびMSX用三相コンタクタ
MP25用の完全な圧力フランジ
MP25プラスター機械用圧力フランジ ここにあるのはMP25圧力フランジで、MSXミキサーポンプでも使用されています。圧力フランジはローターステーターポンプの下に取り付ける部品です。プラスター機械とはテンションアンカーで接続されています。ローターステーターは圧力フランジを保持する2つのテンショ...
詳細を全部見るPutzmeister MP 25 は、世界中の建設現場で信頼されているスプレーマシンです。 MP 25 ポンプは、カタールの砂漠から北極圏のノルウェーまで、ほぼあらゆる条件下で動作します。 MP 25 の利点は何ですか? MP 25 ミキサーポンプは、その頑丈な設計と比類なき性能で人気があ...
詳細を全部見るMP25またはMSXプラスターリングマシン用ドライバークロウ このドライバークロウは、MP25やMSXのような人気のある機械を含む、いくつかの異なるミキシングポンプに使用されています。 ドライバークロウが適切に機能していることが非常に重要です。クロウが損傷しているか摩耗している場合、ローターが...
詳細を全部見るDelta2 コンプレッサー、200 l / min、400 V / 50 Hz カットオフなし
MP25およびÜlzener用Delta2コンプレッサー これはMP25やMSX、さらにÜlzener Putzknecht S48などの複数の機械で動作するDelta2コンプレッサーです。 こちらはカットオフなしのDelta2コンプレッサー200 l / min、400 V / 50 Hzです。
デルタコンプレッサー用修理キット この完全なコンプレッサー修理キットには、デルタコンプレッサーを稼働させ続けるために必要なすべてが含まれています。MP25のようなミキシングポンプはデルタコンプレッサーと連携します。 残念ながら、コンプレッサーはMP25の中で最も繊細な部品の一つですが、このセッ...
詳細を全部見るD6-3ドリルはヨーロッパの建設現場で最も一般的なローターステーターポンプです。PFT G4のようなプラスター機械やその他多くの機械は、石膏やプラスターなどの材料でこのローターステーターと非常に良く機能します。 ドイツ製。 D6-3「ドリル」セットの技術情報 ステーター直径: 89 mm ...
詳細を全部見るローターステーターセットD6-3。 ドイツ製。 D6-3セットに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量(@ 400 I 200 RPM): 20 l/min I 10 l/min 最大粒径: 3 mm ロータ...
詳細を全部見るローターステーターセット D4-1/2。 2つのステーターオプション:クランプ一体型のグレーまたはメンテナンスフリーのグリーン。 ドイツ製。 D4-1/2 セットの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量 (@ 400...
詳細を全部見るローターステーターセットD7-2.5。 ドイツ製。 D7-2.5セットの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量 (@ 400 I 200 RPM): 25 l/min I 12 l/min 最大粒径: 5 mm ロー...
詳細を全部見るローターステーターセット D8-2。 D8-2の適用分野: 溝付きグレーティング、滑らかなグレーティング、および特殊な仕上げ材。 ドイツ製。 D8-2セットの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 ショア 流量 (@ 400 I 20...
詳細を全部見るローター ステーターセット D4-1/4。 2つのステーターオプション:クランプ一体型の黒色またはメンテナンスフリーの青色。 ドイツ製。 についての技術情報 D4-1/4 セット ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量 (...
詳細を全部見るこれはローターステーターD-5のロングバージョンです。D出力のあるどのプラスター機械でも使用できますが、特にMP25のような機械で人気があります。 このポンプは最大30バールの圧力に耐え、粒度は4mmまで対応可能です。ステーターの長さは350mm、周囲は90mmで、D5スクリューポンプのショー...
詳細を全部見る一体型クランプ付きのD5ショートとしても知られています。 ドイツ製。 についての技術情報 D8-1.5 セット ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量(@ 400 I 200 RPM): 38 l/min I 19 l/min ...
詳細を全部見るThis is the genuine PFT Twister version of the D6-3. For the standard version see the D6-3 rotor stator set. Maintenance-Free D6-3 Screw Pump, Pres...
詳細を全部見るD6-2はオレンジ色で円筒形のステーターを持っています。D6-2のステーターは典型的な「D-ポンプ」の直径89mmですが、長さは200mmだけです。 ドイツ製。 D6-2の適用分野 石膏プラスター、石灰石膏プラスター、下塗りモルタル、軽量モルタル。 D6-2セットに関する技術情報 ステータ...
詳細を全部見るステーター こちらはD6-3 セット用です。 ドイツ製。 D6-3ステーターに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量 (@ 400 I 200 RPM): 20 l/min I 10 l/min 最大...
詳細を全部見るローターステータセットD4-1/1。 ドイツ製。 D4-1/1セットに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量 (@ 400 I 200 RPM): 25 l/min I 12 l/min 最大粒径: 3 mm ...
詳細を全部見るローターステーターセット D5ショート。 ドイツ製。 D5ショートセットに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量(@ 400 I 200 RPM): 38 l/min I 19 l/min 最大粒度: 4 ...
詳細を全部見るローター ステーター セット D5-2.5 (D5-2,5). ドイツ製。 についての技術情報 D5-2.5 セット ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量 (@ 400 I 200 RPM): 22 l/min I 11...
詳細を全部見るPFT ツイスター ステーター は D6-3 "Drill" セットの一部です。 ドイツ製。 D6-3 PFT ツイスター ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量 (@ 400 I 200 RPM...
詳細を全部見るローター D6-3 エコ 高合金工具鋼
ドイツ製。 メンテナンスフリー 円筒形ステーター チューブ:Ø 89 mm 長さ:270 mm ゴムの品質:CB 73 色:グリーン
D5-2.5 ECOスクリューポンプ用のステーター ドイツ製。 D5-2.5 ECOステーターに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 最大粒径: 3 mm ローター: D5-2.5 ECOローター ステーター ...
詳細を全部見るローター のための スクリューポンプ D5-2.5 ECO ドイツ製。 D5-2.5 ECOローターに関する技術情報 ローター材質: 高合金工具鋼 ローターデザイン: スリット付き。 ステーター: D5-2.5 ステーター 購入する D5-2.5 ECOセット.
ローターステーターは、D5-2.5と間違えないように、D PumpファミリーのD5-2.5 ECOとして知られる部品です。 ドイツ製。 についての技術情報 D5-2.5 ECO セット ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 最...
詳細を全部見るスクリューポンプ D8-1.5用のクランプ一体型ステーターです。 ドイツ製。 についての技術情報 D8-1.5 ステーター ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量(@ 400 I 200 RPM): 38 l/min I 19...
詳細を全部見るローターはスクリューポンプ D8-1.5用です。 ドイツ製。 D8-1.5 ローターに関する技術情報 ローター材質:高合金工具鋼または鋳鉄 ステーター: D8-1.5 ステーター ローターは特に指定がない限り鋳鉄製です。 お問い合わせ 高合金工具鋼D8-1.5ローターの見積もりについて...
詳細を全部見るのステーター スクリューポンプ D7-2.5。 ドイツ製。 についての技術情報 D7-2.5 ステーター ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量 (@ 400 I 200 RPM): 25 l/min I 12 l/min ...
詳細を全部見るローター D 4-3、時計回りの回転
ステーター TWISTER D 4-3 PIN、時計回りの回転
ステーター スクリューポンプ D5-Long用。これはステーター長350mmのD5のロングバージョンです。 ドイツ製。 D5ロングステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 350 mm ゴムの品質: 63ショア 流量(@ 400 I 200 RPM): ...
詳細を全部見るローター スクリューポンプ D5-ロング用。ステーター長350mmのD5のロングバージョンです。 ドイツ製。 D5 ロングローターに関する技術情報 ローター材質: 高合金工具鋼 ステーター: D5 ロングステーター 購入する D5-ロングセット
ローター for スクリューポンプ D5 Short。 ドイツ製。 D5 Short ローターに関する技術情報 材質: 高合金工具鋼 ステーター: D5 Short ステーター 購入する D5 Short セット。
ステーター スクリューポンプ D5ショート。 ドイツ製。 D5ショートステーターに関する技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量(@ 400 I 200 RPM): 38 l/min I 19 l/min 最大粒...
詳細を全部見るスクリューポンプ D7-2.5用ローター。 ドイツ製。 D7-2.5 ローターの技術情報 ローター材質:高合金工具鋼または鋳鉄 ステーター: D7-2.5 ステーター 指定がない場合、D7-2.5 ローターは鋳鉄製です。 お問い合わせ 高合金工具鋼について。 購入はこちら:D7-2.5...
詳細を全部見るステーター こちらはD6-3 \"Drill\"セット用です。 ドイツ製。 D6-3 \"Drill\" ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore 流量 (@ 400 I 200 RPM): 20 l/...
詳細を全部見るステーター for スクリューポンプ D4-1/1 ドイツ製。 D4-1/1 ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 63ショア 流量 (@ 400 I 200 RPM): 25 l/min I 12 l/min 最大粒径:...
詳細を全部見るローター for スクリューポンプ D4-1/1 ドイツ製。 D4-1/1 ローターの技術情報 材質: 高合金工具鋼 ステーター: D4-1/1 ステーター 購入する D4-1/1 セット
ローター スクリューポンプ D4-1/2。 ドイツ製。 D4-1/2 ローターに関する技術情報 材質: 高合金工具鋼 ステーター: D4-1/2 ステーター 購入する D4-1/2 セット。
ステーター for スクリューポンプ D4-1/2。 2つのステーターオプション:クランプ一体型のグレーまたはメンテナンスフリーのグリーン。 ドイツ製。 D4-1/2 ステーターの技術情報 ステーター直径: 89 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore ...
詳細を全部見るローター for スクリューポンプ D4-1/4。 ドイツ製。 D4-1/4 ローターに関する技術情報 材質: 高合金工具鋼 ステーター: D4-1/4 ステーター 購入する D4-1/4 セット。
The Putzmeister MP 25 (MP25) is a mixing pump for dry mortar, plaster and render up to 4 mm grain. Here you find its spare and wear parts: the original mixing spiral (Putzmeister 211773003), the driver claw, pressure flanges, the Delta compressor with its repair kit and single parts, the water flow meter, wheels, cleaning tools and control parts. Where a part is an original Putzmeister part, the product page shows the Putzmeister number, so you can check it against your machine's parts list.
Not sure which part you need? Send us the article and machine number of your MP 25 and a photo of the old part, and we'll confirm it before you order. Contact our team.
Crafted with meticulous attention to detail, ensuring durability, reliability, and top-tier performance
We offer bulk discounts on large quantities and special pricing for distributors and machine manufacturers
Our team is committed to providing you with personalized assistance every step of the way, from purchase to aftercare.
Frequently Asked Questions About Putzmeister MP 25 Spare Parts
Which rotor stator fits the Putzmeister MP 25?
Are these original Putzmeister parts?
How do I find the right part number for my MP 25?
What is the difference between the MP 25 Mixit and the MP 25 with 48 V control?
Do you ship MP 25 parts outside Germany?
Are the prices net?
Rotor stators for the Putzmeister MP 25
The MP 25 takes every D-series rotor stator. All D pumps share the same flange and rotate to the right (clockwise). Putzmeister's own lists call the standard pump of the MP 25 Mixit "D6" with the "Ø 6-2L" stator: that is our D5-2.5.
- D4-1/2 and D4-1/4: lower output, for fine products and precise work.
- D5-2.5: the MP 25 standard pump (Putzmeister "D6").
- D6-3: the most common plaster pump, also as "Drill", ECO and PFT Twister versions.
- D8-2, D7-2.5: in between.
- D8-1.5: higher output, less pressure.
The UE 45/7 does not fit the MP 25. Buy the rotor and stator as a set, or just the part that is worn. Not sure which size suits your material? Tell us what you pump and we'll recommend one.
Spare parts for every assembly of the MP 25
- Mixing: the original mixing spiral (Putzmeister 211773003, the same number in both MP 25 parts lists), the MP 25 double spiral, the mixing tube cleaner 245 mm and the armoured cleaning shaft 460 mm.
- Pump end: the driver claw (Putzmeister 209069004 on the MP 25 Mixit, 663987 on the 48 V version), the pressure flange with manometer, the silver pressure flange for D pumps with 1 1/4" thread and the pressure/compression flange with tension anchors.
- Compressed air: the Delta2 compressor 200 l/min, 400 V, 50 Hz, the compressor repair kit, and original single parts: housing (493532), orifice (493527), pressure connection (493534), connecting rod (446292) and safety valve (214722006).
- Water: the flow meter 300-1100 l/h (205945009).
- Electrics and controls: the double push button (460025), the three-phase contactor 11 kW, 42 V for the MP 25 Mixit, the pin insert for the connection cable (419555) and the bush insert 6P 16A (419551).
- Chassis: the wheel with brake, 250 x 70 x 290 mm.
The numbers in brackets are Putzmeister ordering numbers from the official MP 25 parts lists.
Wear parts to keep in stock
On a mixing pump, the parts that wear fastest touch the material: the stator and rotor, the mixing spiral and the driver claw. The compressor membrane is a wear part too, and it is in the repair kit. How fast they wear depends on the material. Coarse, abrasive plasters wear them much faster than fine products. If your MP 25 runs every day, a spare stator, a mixing spiral and a compressor repair kit on the van can save a day on site.
About the Putzmeister MP 25
The Putzmeister MP 25 mixes dry mortar for interior and exterior work: gypsum, lime, cementitious adhesive and reinforcement mortar, fed from the bag or from a silo. The MP 25 Mixit has a 5.5 kW, 400 V drive, a 115 l hopper, a 200 l/min compressor and an M 35 pressure connection, and weighs 240 kg. Putzmeister built it in two control versions, the MP 25 Mixit and the later MP 25 with 48 V control, each with its own parts list. For all other Putzmeister machines and parts, see our Putzmeister collection.
YOU HAVE A QUESTION?
Contact us
Write to us if you have any questions or inquiries. We are also happy to assist you with technical questions.