Rotor Stator Sets for Plaster and Screed Pumps
R7-1.5 ローター ステーター セット
ローター・ステーターセット R7-1.5 (R7-1,5) は、スクリーディングおよびショットクリートに使用されるポンプです。 ドイツ製。 についての技術情報 R7-1.5 セット ステーター直径: 114.3 mm ステーター長さ: 270 mm ゴムの品質: 73 Shore ...
詳細を全部見るUE 45/7 ローター ステーター セット
ローターステーターセットUE 45/7(Ü45/7)は、ショットクリートやモルタルに使用されます。 UE 45/7の用途 ローターステーターポンプUE 45/7は様々な機械で人気があります。特にM-tec Duo MixやUelzener Putzknechtの機械で、モルタル、耐火材トゥンデ...
詳細を全部見るUE 355 ローター ステーター セット
ローター・ステーターセットUE 355 (Ü355)は、ショットクリートおよびスクリード用の人気のローター・ステーター ポンプです。 ドイツ製。 UE 355 の技術情報セット ステーター直径: 127 mm ステーター長さ: 445 mm ゴムの品質: 63ショア 流量 (@ 4...
詳細を全部見るUE 356 ローター ステーター セット
ローターステーターセットUE 356(Ü356)はミラージュとしても知られています。 このポンプはUE 355に似ており、ステーターの直径は同じですが長さは535mmです。これはUE 355より90mm長くなっています。 ステーターは2種類あります。黄色のUE 356ステーターは60ショアの柔...
詳細を全部見るUE 356-0.75 ローター ステーター セット
ローターステータセット UE3 56-0.75 (Ü356-0,75)。 ドイツ製。 UE 356-0.75 セットに関する技術情報 ステーター直径: 127 mm ステーターの長さ: 535 mm ゴムの品質: 73 Shore 流量 (@ 400 I 200 RPM): 98...
詳細を全部見る2L54 ローター ステーター セット
ドイツ製。 Technical information about the 2L54 set ステーター直径: 127 mm ステーター長さ: 535 mm ゴムの品質: 73ショア 最大粒径: 10 mm ローター材質: 高合金工具鋼 ローター ヘッドにはスリットが付いてい...
詳細を全部見る2L74 / 60-12 ローター ステーター セット
2L74 ローター ステーターセットは、60-12 ローター ステーターセットおよびファイターとも呼ばれます。 ドイツ製。 2L74 セットに関する技術情報 ステーター直径: 127 mm ステーター長さ: 665 mm ゴムの品質: 56ショア 流量 (@ 400 I 200 RP...
詳細を全部見る2L75 ローター ステーター セット
2L75 ローター・ステーターセット。 ドイツ製。 2L75 セットの技術情報 ステーター直径: 127 mm ステーター長さ: 665 mm ゴムの品質: 56ショア 流量 (@ 400 I 200 RPM): 380 l/min I 190 l/min 最大粒径: 10 mm ロ...
詳細を全部見る2L7 ローター ステーター セット
2L7ステーターはボッシュポンプに使用できます。このステーターはプッツマイスターの予備部品でもあります。 ドイツ製。 2L7セットに関する技術情報 ステーター直径: 127 mm ステーター長さ: 540 mm ゴムの品質: 56ショア 流量 (@ 400 I 200 RPM): 24...
詳細を全部見るBetonstar 2 ローター ステーター セット
BetonstarはBetonstar IIおよびMagnum Pumpとしても知られています。 このローターステーターセットの別名:Betonstar IIおよびMagnum ドイツ製。 Betonstar 2セットに関する技術情報 ステーター直径:146 mm ステーター長さ: 500...
詳細を全部見る75.15 (7515) ローター ステーター セット
75.15 ローター ステーター セット。 別名: 7515, 75-15、1.5L7、トルネード 機械: Bremat、Overmat、Mixmobil、Glaap Brinkmann、BMS、Putzmeister SP25、SP20、Transmix、Brinkmann FHS250、...
詳細を全部見る1.5L8 ローター ステーター セット
1.5L8ローター・ステーターセット。1,5L8またはCobra 1とも呼ばれます。 ドイツ製。 1.5L8セットに関する技術情報 ステーター直径: 193 mm ステーター長さ: 655 mm ゴムの品質: 63 ショア 流量 (@ 400 I 200 RPM): 680 l/min...
詳細を全部見る2L8 ローター ステーター セット
2L8 ローター ステーターセットはCobra 2という名前でも知られています。 これは重機を使ったコンクリートポンプ用の当社最大のポンプです。 ドイツ製。 2L8 セットの技術情報 ステーター直径: 193 mm ステーター長さ: 655 mm ゴムの品質: 63 ショア 流量 (@...
詳細を全部見るスピーディー MP ローター ステーター ポンプセット
これはオリジナルのSpeedy MPローターステータポンプです。非常に正確な結果を提供し、とても速く快適な作業を可能にします。
T9-2 ローター ステーター セット
このローターステータセットはT9-2です。 ドイツ製。 T9-2セットに関する技術情報 ステーター直径: 127 mm ステーター長さ: 665 mm ゴムの品質: 73 Shore 最大粒径: 10 mm ローター材質: 高合金工具鋼 ステーター は一体型クランプ付きです。
6012 プラス 146 グリーン ローター ステーター セット
ローターステーターは6012 Plus 146 グリーンです。 ドイツ製。 6012 Plus 146 グリーンセットの技術情報 ステーター直径: 146 mm ステーター長さ: 655 mm ゴムの品質: 63ショア 最大粒度: 12 mm ローター材質: 高合金工具鋼 ステータ...
詳細を全部見る6012 プラス 146 イエロー ローター ステーター セット
ローターステーターは6012 Plus 146 イエローです。 ドイツ製。 6012 Plus 146 イエローセットの技術情報 ステーター直径: 146 mm ステーター長さ: 650 mm ゴムの品質: 63ショア 最大粒度: 12 mm ローター材質: 高合金工具鋼 ステータ...
詳細を全部見る6012 プラス 159 ホワイト ローター ステーター セット
ローターステーターは6012 Plus 159 ホワイトです。 ドイツ製。 6012 Plus 159 ホワイトセットの技術情報 ステーター直径: 159 mm ステーター長さ: 660 mm ゴムの品質: 63ショア 最大粒度: 14 mm ローター材質: 高合金工具鋼 ステ...
詳細を全部見るステーター 6012 プラス 159 ホワイト
6012 Plus 159 White スクリューポンプ用のステーターです。 ドイツ製。 6012 Plus 159 White ステーターに関する技術情報 ステーター直径: 159 mm ステーター長さ: 660 mm ゴムの品質: 63ショア 最大粒度: 14 mm ローター...
詳細を全部見るB2-250 ローター ステーター セット
Bornemannの進行キャビティポンプB2-250、別名B2/250。 ドイツ製。 B2-250セットの技術情報 ステーター直径: 89 mm ステーター長さ: 445 mm ゴムの品質: NBR 最大粒径: 5 mm ローター材質: C45、クロム ステーターは青色でメンテナンス...
詳細を全部見るR7-3 ローター ステーター セット
ローターステーターはR7-3です。 ドイツ製。 R7-3セットに関する技術情報 ステーター直径: 114 mm ステーターの長さ: 535 mm ゴムの品質: 73 Shore 最大粒度: 6 mm ローター材質: 高合金工具鋼 ステーターは黄色です。 ローターにはスリットがあります。
ステーター 2L74 メンテナンスフリー
1つの回転防止ロック付き パイプ:Ø 127 mm 長さ:665 mm ゴムの品質:CB 56 色:スカイブルー
ステーター ピクター 40LL OS 左 wf
ステーター Pictor 40LL OS 左 wf メンテナンスフリー チューブ: Ø 60 mm 長さ: 210 mm ゴムの品質: CB 73 Shore SBR
ステーター EH800 mf
ステーター EH800 mfメンテナンス不要 チューブ: Ø152.4 x 5 mm 長さ: 440 mm ゴムグレード: SBR 56 ショア 色: RAL 3000
Rotor stator sets, rotors and stators for the screw pumps (progressive cavity pumps) in plaster, mortar and screed machines. They pump plaster, mortar, flowing screed, grout, refractory and geopolymer materials, and are used in 3D concrete printing. We carry more than 80 models, from the D6-3 and 2L6 to the UE 45/7, R7-1.5 and 7515. Only need one part? See our rotors and stators.
Can't find your model? Send us the machine and the designation of your old pump, and we'll identify it. Contact our team.
How a rotor stator pump works:
Rotor stators by pump size
- D4-1/2 and D4-1/4: lower output, for fine products and precise work.
- D5-2.5: the pump Putzmeister lists as "D6" with the "Ø 6-2L" stator, standard on the MP 25 Mixit. Also as ECO.
- D6-3: the most common plaster pump. Also as D6-3 "Drill", ECO and PFT Twister D6-3.
- D7-2.5 and D8-2: in between.
- D8-1.5, also sold as D5 Short: higher output, less pressure.
- UE 45/7: for flowing screed and high volumes.
- 2L6: the stator is always 101.6 mm.
All D-series pumps share the same flange and rotate to the right (clockwise).
Rotor stators by machine
Confirmed pumps for the machines we stock spare parts for. Each link opens the machine's spare parts page.
- m-tec Duo Mix 2000: every D-series rotor stator, the UE 45/7 and the R7-1.5. D4, UE 45/7 and R7-1.5 need an m-tec change flange (numbers on the machine page).
- Ülzener Putzknecht S48: every D-series rotor stator and the UE 45/7, with the larger suction flange 048.03.825.
- Putzmeister MP 25: every D-series rotor stator, standard D5-2.5. The UE 45/7 does not fit.
- PFT G4: every D-series rotor stator (standard PFT Twister D6-3) and the R7-1.5 with the R-pump suction flange.
- Putzmeister SP 11: 2L6 as standard. Putzmeister also lists the 2L75, 2L88 and 2L74, depending on the version.
- Putzmeister S5: 2L6 as standard, the 2L74 on the S 5 EF.
We also carry rotor stators for machines from Turbosol, Brinkmann, MAI, Imer, Utiform and Inotec. Your machine is not on the list? Send us the model and we'll check which pump fits.
How to choose the right rotor stator
A rotor stator only fits if all of these match your machine:
- Designation: start from the pump in your machine, for example D6-3, 2L6 or R7-1.5, and match it completely.
- Stator diameter: must fit the machine. Browse by diameter: <89, 89, 101, 114, 127, 146, 159, 193 mm.
- Rotor head and connection: must fit the drive. Two pumps with similar output are not interchangeable if the rotor heads differ.
- Direction of rotation: right or left, depending on the machine.
- Output and grain size: models differ widely in output, and the maximum grain of your material must suit the pump.
- Shore hardness: stator rubber hardness is given in Shore A. A lower number means softer rubber. Abrasive mixes suit softer rubber, smooth materials harder rubber. Harder rubber builds more pressure.
Maintenance-free or adjustable stators?
- Maintenance-free stators need no retensioning. Once installed, the pump is ready to run. A common choice for flowing screed.
- Adjustable (clampable) stators can be retensioned when the pressure drops. This compensates part of the wear and keeps the pump at pressure for longer. They come with an integrated clamp, or as a slotted stator in an external clamping jacket.
Which design suits you depends on the pump model, the machine and the material.
Frequently Asked Questions About Rotor Stator Pumps
What is a rotor stator pump?
Does the same rotor stator fit different machines?
Should I replace rotor and stator together?
What do designations like D6-3 or 2L6 mean?
How long does a rotor stator last?
Can you supply a rotor stator that is not in the shop?
YOU HAVE A QUESTION?
Contact us
Write to us if you have any questions or inquiries. We are also happy to assist you with technical questions.
info@putzparts24.de
+49 (0) 30 30807300