PFT G4 Spare Parts & Rotor Stators, Compatible

Sort by

69 products

D6-3 Rotor Stator Set "Drill"

€90,30 - €90,30

€90,30

€90,30 - €90,30

€90,30

D6-3 Drill Rotor Stator Set – The Industry Standard for Plastering Pumps The D6-3 Drill rotor stator set is one of the most widely used screw pump ...

View full details

D6-3 Rotor Stator Set

€85,05 - €85,05

€85,05

€85,05 - €85,05

€85,05

D6-3 Rotor Stator Set – Technical Specifications & Applications The D6-3 rotor stator set is a high-performance pumping unit designed for deman...

View full details

D4-1/2 Rotor Stator Set

€103,74 - €135,24

€103,74

D4-1/2 Rotor Stator Set Precision Screw Pump with Two Stator Options – 8 l/min Made in Germany The D4-1/2 Rotor Stator Set is a compact progressive...

View full details

D8-2 Rotor Stator Set

€101,85 - €119,70

€101,85

D8-2 Rotor Stator Set High-Output Screw Pump for Structured & Special Renders – 34 l/min Made in Germany The D8-2 Rotor Stator Set is a high-ou...

View full details

D7-2.5 Rotor Stator Set

€90,30 - €90,30

€90,30

€90,30 - €90,30

€90,30

D7-2.5 Rotor Stator Set – High Output & Pressure-Stable Pumping Performance The D7-2.5 rotor stator set is a powerful and reliable screw pump s...

View full details

Solenoid valve 1/2" - 42V

€61,32 - €61,32

€61,32

€61,32 - €61,32

€61,32

Solenoid Valve 1/2" – 42V 42V Water Solenoid Valve for Plastering Machines & Mixing Pumps The Solenoid Valve 1/2" – 42V is an electrical replac...

View full details

D4-1/4 Rotor Stator Set

€103,74 - €135,24

€103,74

D4-1/4 Rotor Stator Set D4-1/4 Progressive Cavity Pump Set Made in Germany The D4-1/4 Rotor Stator Set is a premium-quality progressive cavity pump...

View full details

D5 Long Rotor Stator Set

€128,10 - €128,10

€128,10

€128,10 - €128,10

€128,10

D5 Long Rotor Stator Set Long D5 Screw Pump for Plastering Machines – 42 l/min, 30 bar Made in Germany The D5 Long Rotor Stator Set is the longer v...

View full details

PFT Rotor Stator Twister D6-3 Set

€117,60 - €117,60

€117,60

€117,60 - €117,60

€117,60

PFT Rotor Stator Twister D6-3 Set Maintenance-Free D6-3 Screw Pump – Pressure-Stable & Ready to Use Made in Germany The PFT Twister D6-3 Rotor ...

View full details

PFT Rotor Stator Twister D6-3 Set

Pressure Switch

€59,22 - €59,22

€59,22

€59,22 - €59,22

€59,22

Pressure Switch FF4-4 – 22–4 Bar Pressure Switch for Plastering Machines & Mixing Pumps The FF4-4 Pressure Switch with a 22–4 bar pressure rang...

View full details

D8-1.5 Rotor Stator Set

€117,60 - €117,60

€117,60

€117,60 - €117,60

€117,60

D8-1.5 Rotor Stator Set High-Output Screw Pump with Integrated Clamp – 38 l/min Made in Germany The D8-1.5 Rotor Stator Set, also known as the D5 S...

View full details

D6-2 Rotor Stator Set

€109,20 - €109,20

€109,20

€109,20 - €109,20

€109,20

D6-2 Rotor Stator Set Compact D6-2 Screw Pump for Plastering Applications – Made in Germany The D6-2 Rotor Stator Set is a compact progressive cavi...

View full details

Air Compressor Filter for K2

€1,47 - €1,47

€1,47

€1,47 - €1,47

€1,47

Air Compressor Filter for K2 – 100 mm Replacement Air Filter for Handy K2 Compressor The Air Compressor Filter for K2 is a replacement filter for t...

View full details

Stator D6-3

€37,80 - €37,80

€37,80

€37,80 - €37,80

€37,80

Stator D6-3 D6-3 Stator for Plastering Machines – Made in Germany The D6-3 Stator is the standard stator for the D6-3 Rotor Stator Set, one of the ...

View full details

Needle Valve 1/2"

€51,45 - €51,45

€51,45

€51,45 - €51,45

€51,45

Needle Valve 1/2" – PFT G4 1/2" Needle Valve for PFT G4 Plastering Machine The 1/2" Needle Valve is a replacement component for the PFT G4 plasteri...

View full details

Water Flow Meter 150-1500 l/h kpl. (for G4 and G5)

€74,97 - €74,97

€74,97

€74,97 - €74,97

€74,97

Water Flow Meter 150–1500 l/h for PFT G4 & G5 Complete Water Flow Meter for PFT G4 and G5 – 150–1500 l/h The Water Flow Meter 150–1500 l/h is a...

View full details

Water Flow Meter 150-1500 l/h kpl. (for G4 and G5)

Helical Blade Mixing Shaft 520 mm, PFT G4, G5

Mixing Shaft (Helical Blade) for PFT G4 520mm

€49,77 - €98,28

€49,77

Mixing Shaft (Helical Blade) 520 mm – PFT G4 / G5 Classic 520 mm Mixing Shaft for PFT G4, G5, V.E.P. VR6 & Compatible Mixing Pumps The 520 mm H...

View full details

Mixing Shaft (Helical Blade) for PFT G4 520mm

D5 Short Rotor Stator Set

€93,45 - €93,45

€93,45

€93,45 - €93,45

€93,45

D5 Short Rotor Stator Set Compact D5 Screw Pump for Plaster & Mortar Applications – 38 l/min Made in Germany The D5 Short Rotor Stator Set is a...

View full details

D5-2.5 Rotor Stator Set

€100,80 - €100,80

€100,80

€100,80 - €100,80

€100,80

D5-2.5 Rotor Stator Set Maintenance-Free Screw Pump for Plaster & Mortar – 22 l/min The D5-2.5 Rotor Stator Set is a professional progressive c...

View full details

D4-1/1 Rotor Stator Set

€133,14 - €141,54

€133,14

D4-1/1 Rotor Stator Set D4-1/1 Progressive Cavity Pump Set Made in Germany The D4-1/1 Rotor Stator Set is a premium-quality progressive cavity pump...

View full details

Stator D6-3 PFT Twister

€70,35 - €70,35

€70,35

€70,35 - €70,35

€70,35

Stator D6-3 PFT Twister D6-3 Twister Stator for PFT Plastering Machines Made in Germany The D6-3 PFT Twister Stator is a high-quality replacement s...

View full details

Mixing Tube Cleaner G4

€29,40 - €29,40

€29,40

€29,40 - €29,40

€29,40

Mixing Tube Cleaner G4 – PFT G4 / G5 / V.E.P. VR6 Mixing Tube Cleaner for PFT G4, PFT G5 & V.E.P. VR6 The Mixing Tube Cleaner G4 is designed fo...

View full details

Stator D8-1.5

€42,00 - €57,75

€42,00

Stator D8-1.5 (Integrated Clamp) Stator for D8-1.5 Screw Pump with Integrated Clamp Made in Germany The D8-1.5 Stator with Integrated Clamp is a pr...

View full details

Stator D7-2.5

€43,05 - €43,05

€43,05

€43,05 - €43,05

€43,05

Stator D7-2.5 Stator for D7-2.5 Screw Pump Made in Germany The D7-2.5 Stator is a premium-quality stator designed for use with the D7-2.5 progressi...

View full details

The PFT G4 is a mixing pump for gypsum and lime plasters, cement and lime-cement plasters, insulating plasters, masonry mortar and flowing screed. Here you find spare and wear parts suitable for it: D- and R-series rotor stators, the pressure flange and suction flanges, mixing shafts and driver claws, the mixing tube cleaner, water fittings such as the 150-1500 l/h water flow meter, and parts for the K2 compressor. These are our own or compatible parts, not original PFT parts. Each product page says which machines it fits.

Not sure which part you need? Send us the serial number of your G4 and a photo of the old part, and we'll confirm it before you order. Contact our team.

Rotor stators for the PFT G4

PFT's own operating manual lists the TWISTER D6-3 as the G4's standard pump: about 20 l/min at 400 rpm, up to 30 bar, grain up to 3 mm. The G4 takes D-pumps on the D suction flange and R-pumps on the R-pump suction flange. These pumps from our range are suitable for the G4:

D6-3 and PFT Twister D6-3: the standard size, the Twister is the genuine PFT version.
D6-3 "Drill": 89 mm stator, 73 Shore. The standard size for plaster.
D7-2.5: for materials up to 5 mm grain.
D8-2: 34 l/min at 400 rpm, grain up to 3 mm.
D8-1.5: 38 l/min at 400 rpm, grain up to 3 mm, with integrated adjustable clamp.
R7-1.5: 114.3 mm stator, 60 l/min at 400 rpm, grain up to 7 mm. For screed. Needs the R-pump suction flange.
SD 6-3 Slimline Soft: for the 230 V version of the G4.

The G4 takes every D-series rotor stator. The D6-3 is the most common plaster pump. The D8-1.5 gives higher output at less pressure, and the R7-1.5 is for screed. All D pumps rotate to the right (clockwise).

Buy the rotor and stator as a set, or just the part that is worn. Not sure which size suits your material? Tell us what you pump and we'll recommend one.

Spare parts for every assembly of the PFT G4

Pump end: the pressure flange with 1 1/4" thread, the silver suction flange for D-pumps and the suction flange for R-pumps.
Mixing: the 520 mm helical blade mixing shaft, the BIONIK mixing shaft (clockwise), the driver claw with catching funnel in 25 mm and 30 mm, the driving claw for the G4 Bionics, and the mixing tube cleaner with its cleaning shaft.
Hopper: the protection grille.
Water: water flow meters 150-1500 l/h and 100-1000 l/h, the 1/2" needle valve for fine water adjustment, the 3/4" low-pressure reducer valve, the 1/2" 42 V solenoid valve and the FF4-4 pressure switch.
Compressed air: the K2 compressor, its air filter, cylinder head and membrane.

Many of these parts are shared with the PFT G5. The product page says so where that applies. For the other PFT machines, see our PFT collection.

Wear parts to keep in stock

On a mixing pump, the parts that wear fastest touch the material: the stator and rotor, the mixing shaft, the driver claw and the mixing tube cleaner. How fast depends on the material. Coarse, abrasive plasters and screeds wear them much faster than fine products. The water flow meter is a common replacement part too. If your G4 runs every day, a spare stator and a mixing shaft on the van can save a day on site.

About the PFT G4

The PFT G 4 XL is PFT's entry-level mixing pump for ready-mixed dry mortar. It runs on 400 V three-phase with a 5.5 kW pump motor. On request it comes with a switchable frequency converter (FU) for 230 and 400 V. The hopper holds 150 l, or 200 l with the extension. You can fill it by hand from bags or mount it under a silo or container with the PFT delivery hood. With the standard pump, PFT gives a conveying distance of up to 30 m with a 25 mm hose and up to 50 m with a 35 mm hose, depending on material, height and pump condition.

The G4 has been built in several generations. The parts on this page fit the G4 with D- or R-pump. If your machine is a newer version, send us the serial number and we'll check.

Frequently Asked Questions About PFT G4 Spare Parts

Which rotor stator fits the PFT G4?

PFT fits the TWISTER D6-3 as standard: about 20 l/min at 400 rpm, grain up to 3 mm. From our range, the D6-3 "Drill", D7-2.5, D8-2 and D8-1.5 are suitable on the D suction flange, the R7-1.5 on the R-pump suction flange, and the SD 6-3 Slimline Soft on the 230 V G4. Every D-series rotor stator fits the G4. The D6-3, including the genuine PFT Twister D6-3, is the most common plaster pump. The D8-1.5 gives higher output at less pressure. All D pumps rotate to the right (clockwise).

Where do I find the part number for my G4?

PFT prints the spare parts lists with drawings in part 2 of the G4 operating manual. PFT part numbers have eight digits, for example 20 10 10 10. If you don't have the manual, send us the machine's serial number and a photo of the old part, and we'll identify it.

Do you ship G4 parts outside Germany?

Yes. We ship from Berlin across Europe and internationally.

Are these original PFT parts?

Most are our own or compatible parts made to fit the G4. The PFT Twister D6-3 set and stator are genuine PFT. Each product page says which machines a part fits.

Which compressor does the G4 use?

PFT fits the G4 with the K2 N compressor, 0.25 Nm³/min. We carry the K2 compressor and, suitable for the G4, its air filter, cylinder head and membrane.

Are the prices net?

Yes. All prices are net, excluding VAT. For larger quantities or dealer orders, ask us for a quote.

YOU HAVE A QUESTION?

Contact us

Write to us if you have any questions or inquiries. We are also happy to assist you with technical questions.

info@putzparts24.de

+49 (0) 30 30807300

Language

Spare Parts for the PFT G4

Rotor stators for the PFT G4

Spare parts for every assembly of the PFT G4

Wear parts to keep in stock

About the PFT G4

Frequently Asked Questions About PFT G4 Spare Parts

Contact us