Skip to content

Spare Parts for the PFT G4

Solenoid Valve 1/2" 42V for Water System

Solenoid valve 1/2" - 42V

€61,32 - €61,32
€61,32
€61,32 - €61,32
€61,32

Solenoid Valve 1/2" – 42V 42V Water Solenoid Valve for Plastering Machines & Mixing Pumps The Solenoid Valve 1/2" – 42V is an electrical replac...

View full details

Solenoid valve 1/2" - 42V

Pressure Switch FF4-4 for Plastering Machines

Pressure Switch

€59,22 - €59,22
€59,22
€59,22 - €59,22
€59,22

Pressure Switch FF4-4 – 22–4 Bar Pressure Switch for Plastering Machines & Mixing Pumps The FF4-4 Pressure Switch with a 22–4 bar pressure rang...

View full details

Pressure Switch

Air Filter 100 mm for Handy K2 Compressor

Air Compressor Filter for K2

€1,47 - €1,47
€1,47
€1,47 - €1,47
€1,47

Air Compressor Filter for K2 – 100 mm Replacement Air Filter for Handy K2 Compressor The Air Compressor Filter for K2 is a replacement filter for t...

View full details

Air Compressor Filter for K2

Water Flow Meter 150-1500 l/h, PFT G4 and G5

Water Flow Meter 150-1500 l/h kpl. (for G4 and G5)

€74,97 - €74,97
€74,97
€74,97 - €74,97
€74,97

Water Flow Meter 150–1500 l/h for PFT G4 & G5 Complete Water Flow Meter for PFT G4 and G5 – 150–1500 l/h The Water Flow Meter 150–1500 l/h is a...

View full details

Water Flow Meter 150-1500 l/h kpl. (for G4 and G5)

Needle Valve 1/2" for PFT G4 Water System

Needle Valve 1/2"

€51,45 - €51,45
€51,45
€51,45 - €51,45
€51,45

Needle Valve 1/2" – PFT G4 1/2" Needle Valve for PFT G4 Plastering Machine The 1/2" Needle Valve is a replacement component for the PFT G4 plasteri...

View full details

Needle Valve 1/2"

Helical Blade Mixing Shaft 520 mm, PFT G4, G5

Mixing Shaft (Helical Blade) for PFT G4 520mm

€49,77 - €98,28
€49,77 - €98,28
€49,77 - €98,28
€49,77

Mixing Shaft (Helical Blade) 520 mm – PFT G4 / G5 Classic 520 mm Mixing Shaft for PFT G4, G5, V.E.P. VR6 & Compatible Mixing Pumps The 520 mm H...

View full details

Mixing Shaft (Helical Blade) for PFT G4 520mm

Mixing Tube Cleaner for PFT G4, G5, V.E.P. VR6

Mixing Tube Cleaner G4

€29,40 - €29,40
€29,40
€29,40 - €29,40
€29,40

Mixing Tube Cleaner G4 – PFT G4 / G5 / V.E.P. VR6 Mixing Tube Cleaner for PFT G4, PFT G5 & V.E.P. VR6 The Mixing Tube Cleaner G4 is designed fo...

View full details

Mixing Tube Cleaner G4

Suction Flange Silver for PFT G4 and G5

Suction Flange Silver

€50,40 - €50,40
€50,40
€50,40 - €50,40
€50,40

Suction Flange Silver for PFT G4 & G5 Replacement Suction Flange for PFT G4 and G5 The Silver Suction Flange is a replacement part designed for...

View full details

Suction Flange Silver

Low-Pressure Reducer Valve 3/4", PFT G4, VR8

Pressure Reducer Valve (Low Pressure) 3/4"

€141,44 - €141,44
€141,44
€141,44 - €141,44
€141,44

Pressure Reducer Valve – Low Pressure 3/4" Low-Pressure Reducing Valve for PFT G4 & VEP VR8 The 3/4" Low-Pressure Reducer Valve is designed for...

View full details

Pressure Reducer Valve (Low Pressure) 3/4"

Pressure Flange 1 1/4" Thread for PFT G4

Pressure Flange for PFT G4

€48,67 - €48,67
€48,67
€48,67 - €48,67
€48,67

Pressure Flange for PFT G4 Pressure Flange with 1 1/4" Thread for PFT G4 The Pressure Flange for PFT G4 is installed directly underneath the rotor ...

View full details

Pressure Flange for PFT G4

Membrane for K2 Compressor, PFT G4 and G5

Membrane for K2

€10,61 - €10,61
€10,61
€10,61 - €10,61
€10,61

Membrane for K2 Air Compressor – PFT G4 / G5 Replacement Membrane for K2 Compressor The Membrane for K2 Air Compressor is a replacement component f...

View full details

Membrane for K2

Driver Claw / Hauling Bracket 25 mm, PFT G4

Driver Claw / Hauling Bracket G4 25mm

€40,69 - €40,69
€40,69
€40,69 - €40,69
€40,69

Driver Claw / Hauling Bracket G4 – 25 mm Driver Claw with Catching Funnel and Screws for PFT G4 The Driver Claw / Hauling Bracket G4 25 mm is a rep...

View full details

Driver Claw / Hauling Bracket G4 25mm

Cleaning Shaft for PFT G4 and G5 Mixing Tube

Cleaning Shaft G4/G5

€24,68 - €24,68
€24,68
€24,68 - €24,68
€24,68

Cleaning Shaft for PFT G4 / G5 Cleaning Shaft for PFT G4 and G5 Plastering Machines The Cleaning Shaft for PFT G4 / G5 is used for cleaning the mix...

View full details

Cleaning Shaft G4/G5

Handy K2 Air Compressor 400 V, 250 l/min

Air Compressor K2

€1.003,59 - €1.003,59
€1.003,59
€1.003,59 - €1.003,59
€1.003,59

Handy K2 Air Compressor – 400 V Original Handy K2 Air Compressor with Pressure Switch The Handy K2 Air Compressor is a compact and proven compresso...

View full details

Air Compressor K2

Driver Claw / Hauling Bracket 30 mm, PFT G4

Driver Claw / Hauling Bracket G4 30mm

€40,69 - €40,69
€40,69
€40,69 - €40,69
€40,69

Driver Claw / Hauling Bracket G4 30 mm – Complete Intake Assembly for PFT G4 The Driver Claw / Hauling Bracket G4 30 mm is a complete intake and dr...

View full details

Driver Claw / Hauling Bracket G4 30mm

Suction Flange for PFT G4 R-Pumps

Suction flange G4 R-pumps

€106,16 - €106,16
€106,16
€106,16 - €106,16
€106,16

Suction Flange for PFT G4 R-Pumps The Suction Flange for R-pumps is a robust connection component designed for professional rotor stator pump syste...

View full details

Suction flange G4 R-pumps

BIONIK Mixing Shaft for G4, Clockwise Rotation

Mixing shaft BIONIK G 4 machine plaster, clockwise rotation

€60,38 - €60,38
€60,38
€60,38 - €60,38
€60,38

BIONIK Mixing Shaft for G4 Plastering Machines – Clockwise Rotation The BIONIK Mixing Shaft for G4 Plastering Machines is a high-performance mixing...

View full details

Mixing shaft BIONIK G 4 machine plaster, clockwise rotation

Protection Grille for PFT G4 Mixing Pump

Protection Grille G4

€101,22 - €101,22
€101,22
€101,22 - €101,22
€101,22

Protection Grille G4 The Protection Grille G4 is a safety component designed for PFT G4 mixing pumps and similar plastering machines. It serves as ...

View full details

Protection Grille G4

G4 Bionics Driving Claw, Drive Coupling

Driving claw G4 Bionics

€55,13 - €55,13
€55,13
€55,13 - €55,13
€55,13

Driving Claw G4 Bionics The Driving Claw G4 Bionics is a high-performance drive component designed for professional mixing pumps, plastering machin...

View full details

Driving claw G4 Bionics

Water Flow Meter 100-1000 l/h for PFT G4, G5

Water Flow Meter 100-1000 l/h (for G4 and G5)

€69,83 - €69,83
€69,83
€69,83 - €69,83
€69,83

Water Flow Meter 100–1000 l/h (for G4 and G5) The Water Flow Meter 100–1000 l/h is a high-quality replacement component designed for professional p...

View full details

Water Flow Meter 100-1000 l/h (for G4 and G5)

PFT G 4 XL Entry-Level Ready Mix Pump

PFT G 4 XL

Spare parts for this machine: all PFT G4 spare parts and rotor stators. Entry-level ready mix pump The thoroughly thought-out design of the PFT G 4...

View full details

PFT G 4 XL

K2 Compressor Cylinder Head, PFT G4, G5, S48

Cylinder head for K2 compressor

€141,75 - €141,75
€141,75
€141,75 - €141,75
€141,75

Cylinder Head for K2 Compressor Replacement Cylinder Head for K2 Air Compressor – PFT G4 / G5 & Ülzener S48 The Cylinder Head for the K2 Compre...

View full details

Cylinder head for K2 compressor

D6-3 Drill Rotor Stator Set for PFT G4

D6-3 Rotor Stator Set "Drill"

€90,30 - €90,30
€90,30
€90,30 - €90,30
€90,30

D6-3 Drill Rotor Stator Set – The Industry Standard for Plastering Pumps The D6-3 Drill rotor stator set is one of the most widely used screw pump ...

View full details

D6-3 Rotor Stator Set "Drill"

D6-3 Rotor Stator Set, 89 mm, 20 l/min

D6-3 Rotor Stator Set

€85,05 - €85,05
€85,05
€85,05 - €85,05
€85,05

D6-3 Rotor Stator Set – Technical Specifications & Applications The D6-3 rotor stator set is a high-performance pumping unit designed for deman...

View full details

D6-3 Rotor Stator Set

The PFT G4 is a mixing pump for gypsum and lime plasters, cement and lime-cement plasters, insulating plasters, masonry mortar and flowing screed. Here you find spare and wear parts suitable for it: D- and R-series rotor stators, the pressure flange and suction flanges, mixing shafts and driver claws, the mixing tube cleaner, water fittings such as the 150-1500 l/h water flow meter, and parts for the K2 compressor. These are our own or compatible parts, not original PFT parts. Each product page says which machines it fits.

Not sure which part you need? Send us the serial number of your G4 and a photo of the old part, and we'll confirm it before you order. Contact our team.

Rotor stators for the PFT G4

PFT's own operating manual lists the TWISTER D6-3 as the G4's standard pump: about 20 l/min at 400 rpm, up to 30 bar, grain up to 3 mm. The G4 takes D-pumps on the D suction flange and R-pumps on the R-pump suction flange. These pumps from our range are suitable for the G4:

  • D6-3 and PFT Twister D6-3: the standard size, the Twister is the genuine PFT version.
  • D6-3 "Drill": 89 mm stator, 73 Shore. The standard size for plaster.
  • D7-2.5: for materials up to 5 mm grain.
  • D8-2: 34 l/min at 400 rpm, grain up to 3 mm.
  • D8-1.5: 38 l/min at 400 rpm, grain up to 3 mm, with integrated adjustable clamp.
  • R7-1.5: 114.3 mm stator, 60 l/min at 400 rpm, grain up to 7 mm. For screed. Needs the R-pump suction flange.
  • SD 6-3 Slimline Soft: for the 230 V version of the G4.

The G4 takes every D-series rotor stator. The D6-3 is the most common plaster pump. The D8-1.5 gives higher output at less pressure, and the R7-1.5 is for screed. All D pumps rotate to the right (clockwise).

Buy the rotor and stator as a set, or just the part that is worn. Not sure which size suits your material? Tell us what you pump and we'll recommend one.

Spare parts for every assembly of the PFT G4

  • Pump end: the pressure flange with 1 1/4" thread, the silver suction flange for D-pumps and the suction flange for R-pumps.
  • Mixing: the 520 mm helical blade mixing shaft, the BIONIK mixing shaft (clockwise), the driver claw with catching funnel in 25 mm and 30 mm, the driving claw for the G4 Bionics, and the mixing tube cleaner with its cleaning shaft.
  • Hopper: the protection grille.
  • Water: water flow meters 150-1500 l/h and 100-1000 l/h, the 1/2" needle valve for fine water adjustment, the 3/4" low-pressure reducer valve, the 1/2" 42 V solenoid valve and the FF4-4 pressure switch.
  • Compressed air: the K2 compressor, its air filter, cylinder head and membrane.

Many of these parts are shared with the PFT G5. The product page says so where that applies. For the other PFT machines, see our PFT collection.

Wear parts to keep in stock

On a mixing pump, the parts that wear fastest touch the material: the stator and rotor, the mixing shaft, the driver claw and the mixing tube cleaner. How fast depends on the material. Coarse, abrasive plasters and screeds wear them much faster than fine products. The water flow meter is a common replacement part too. If your G4 runs every day, a spare stator and a mixing shaft on the van can save a day on site.

About the PFT G4

The PFT G 4 XL is PFT's entry-level mixing pump for ready-mixed dry mortar. It runs on 400 V three-phase with a 5.5 kW pump motor. On request it comes with a switchable frequency converter (FU) for 230 and 400 V. The hopper holds 150 l, or 200 l with the extension. You can fill it by hand from bags or mount it under a silo or container with the PFT delivery hood. With the standard pump, PFT gives a conveying distance of up to 30 m with a 25 mm hose and up to 50 m with a 35 mm hose, depending on material, height and pump condition.

The G4 has been built in several generations. The parts on this page fit the G4 with D- or R-pump. If your machine is a newer version, send us the serial number and we'll check.

Frequently Asked Questions About PFT G4 Spare Parts

Which rotor stator fits the PFT G4?

PFT fits the TWISTER D6-3 as standard: about 20 l/min at 400 rpm, grain up to 3 mm. From our range, the D6-3 "Drill", D7-2.5, D8-2 and D8-1.5 are suitable on the D suction flange, the R7-1.5 on the R-pump suction flange, and the SD 6-3 Slimline Soft on the 230 V G4. Every D-series rotor stator fits the G4. The D6-3, including the genuine PFT Twister D6-3, is the most common plaster pump. The D8-1.5 gives higher output at less pressure. All D pumps rotate to the right (clockwise).

Where do I find the part number for my G4?

PFT prints the spare parts lists with drawings in part 2 of the G4 operating manual. PFT part numbers have eight digits, for example 20 10 10 10. If you don't have the manual, send us the machine's serial number and a photo of the old part, and we'll identify it.

Do you ship G4 parts outside Germany?

Yes. We ship from Berlin across Europe and internationally.

Are these original PFT parts?

Most are our own or compatible parts made to fit the G4. The PFT Twister D6-3 set and stator are genuine PFT. Each product page says which machines a part fits.

Which compressor does the G4 use?

PFT fits the G4 with the K2 N compressor, 0.25 Nm³/min. We carry the K2 compressor and, suitable for the G4, its air filter, cylinder head and membrane.

Are the prices net?

Yes. All prices are net, excluding VAT. For larger quantities or dealer orders, ask us for a quote.

YOU HAVE A QUESTION?

Contact us

Write to us if you have any questions or inquiries. We are also happy to assist you with technical questions.

info@putzparts24.de

+49 (0) 30 30807300