Ülzener Putzknecht S48 Spare Parts & Wear Parts

Sort by

77 products

Handy K2 Air Compressor 400 V, 250 l/min

Air Compressor K2

€1.003,59 - €1.003,59

€1.003,59

€1.003,59 - €1.003,59

€1.003,59

Handy K2 Air Compressor – 400 V Original Handy K2 Air Compressor with Pressure Switch The Handy K2 Air Compressor is a compact and proven compresso...

View full details

WATER BOOSTER PUMP PRESSCONTR.230

€696,15 - €696,15

€696,15

€696,15 - €696,15

€696,15

Water Booster Pump with Pressure Control 230 V Water Booster Pump LSPR010 – 500 W / 230 V with Pressure Control The LSPR010 Water Booster Pump is a...

View full details

WATER BOOSTER PUMP PRESSCONTR.230

Spray Head for Ülzener Putzknecht Machines

Ülzener Putzknecht Spray Head

€66,15 - €66,15

€66,15

€66,15 - €66,15

€66,15

Ülzener Putzknecht Spray Head Spray Head for Ülzener Putzknecht Plastering Machines The Ülzener Putzknecht Spray Head is a replacement part design...

View full details

Injection Hood for Putzknecht S48

€1.438,50 - €1.438,50

€1.438,50

€1.438,50 - €1.438,50

€1.438,50

Injection Hood for Ülzener Putzknecht S48 Original Ülzener Injection Hood – Complete Assembly The Original Ülzener Injection Hood for the Putzknech...

View full details

Injection Hood for Putzknecht S48

K2 Compressor Cylinder Head, PFT G4, G5, S48

Cylinder head for K2 compressor

€141,75 - €141,75

€141,75

€141,75 - €141,75

€141,75

Cylinder Head for K2 Compressor Replacement Cylinder Head for K2 Air Compressor – PFT G4 / G5 & Ülzener S48 The Cylinder Head for the K2 Compre...

View full details

Cylinder head for K2 compressor

D6-3 Rotor Stator Set "Drill"

€90,30 - €90,30

€90,30

€90,30 - €90,30

€90,30

D6-3 Drill Rotor Stator Set – The Industry Standard for Plastering Pumps The D6-3 Drill rotor stator set is one of the most widely used screw pump ...

View full details

D6-3 Rotor Stator Set

€85,05 - €85,05

€85,05

€85,05 - €85,05

€85,05

D6-3 Rotor Stator Set – Technical Specifications & Applications The D6-3 rotor stator set is a high-performance pumping unit designed for deman...

View full details

UE 45/7 Rotor Stator Set

€235,20 - €235,20

€235,20

€235,20 - €235,20

€235,20

UE 45/7 / Ü45/7 Rotor Stator Set Powerful Screw Pump for Screed, Shotcrete, Refractory & Concrete The UE 45/7 Rotor Stator Set, also known as...

View full details

D4-1/2 Rotor Stator Set

€103,74 - €135,24

€103,74

D4-1/2 Rotor Stator Set Precision Screw Pump with Two Stator Options – 8 l/min Made in Germany The D4-1/2 Rotor Stator Set is a compact progressive...

View full details

D7-2.5 Rotor Stator Set

€90,30 - €90,30

€90,30

€90,30 - €90,30

€90,30

D7-2.5 Rotor Stator Set – High Output & Pressure-Stable Pumping Performance The D7-2.5 rotor stator set is a powerful and reliable screw pump s...

View full details

D8-2 Rotor Stator Set

€101,85 - €119,70

€101,85

D8-2 Rotor Stator Set High-Output Screw Pump for Structured & Special Renders – 34 l/min Made in Germany The D8-2 Rotor Stator Set is a high-ou...

View full details

D4-1/4 Rotor Stator Set

€103,74 - €135,24

€103,74

D4-1/4 Rotor Stator Set D4-1/4 Progressive Cavity Pump Set Made in Germany The D4-1/4 Rotor Stator Set is a premium-quality progressive cavity pump...

View full details

D5 Long Rotor Stator Set

€128,10 - €128,10

€128,10

€128,10 - €128,10

€128,10

D5 Long Rotor Stator Set Long D5 Screw Pump for Plastering Machines – 42 l/min, 30 bar Made in Germany The D5 Long Rotor Stator Set is the longer v...

View full details

D8-1.5 Rotor Stator Set

€117,60 - €117,60

€117,60

€117,60 - €117,60

€117,60

D8-1.5 Rotor Stator Set High-Output Screw Pump with Integrated Clamp – 38 l/min Made in Germany The D8-1.5 Rotor Stator Set, also known as the D5 S...

View full details

PFT Rotor Stator Twister D6-3 Set

€117,60 - €117,60

€117,60

€117,60 - €117,60

€117,60

PFT Rotor Stator Twister D6-3 Set Maintenance-Free D6-3 Screw Pump – Pressure-Stable & Ready to Use Made in Germany The PFT Twister D6-3 Rotor ...

View full details

PFT Rotor Stator Twister D6-3 Set

D6-2 Rotor Stator Set

€109,20 - €109,20

€109,20

€109,20 - €109,20

€109,20

D6-2 Rotor Stator Set Compact D6-2 Screw Pump for Plastering Applications – Made in Germany The D6-2 Rotor Stator Set is a compact progressive cavi...

View full details

Stator D6-3

€37,80 - €37,80

€37,80

€37,80 - €37,80

€37,80

Stator D6-3 D6-3 Stator for Plastering Machines – Made in Germany The D6-3 Stator is the standard stator for the D6-3 Rotor Stator Set, one of the ...

View full details

D4-1/1 Rotor Stator Set

€133,14 - €141,54

€133,14

D4-1/1 Rotor Stator Set D4-1/1 Progressive Cavity Pump Set Made in Germany The D4-1/1 Rotor Stator Set is a premium-quality progressive cavity pump...

View full details

D5 Short Rotor Stator Set

€93,45 - €93,45

€93,45

€93,45 - €93,45

€93,45

D5 Short Rotor Stator Set Compact D5 Screw Pump for Plaster & Mortar Applications – 38 l/min Made in Germany The D5 Short Rotor Stator Set is a...

View full details

D5-2.5 Rotor Stator Set

€100,80 - €100,80

€100,80

€100,80 - €100,80

€100,80

D5-2.5 Rotor Stator Set Maintenance-Free Screw Pump for Plaster & Mortar – 22 l/min The D5-2.5 Rotor Stator Set is a professional progressive c...

View full details

Stator D6-3 PFT Twister

€70,35 - €70,35

€70,35

€70,35 - €70,35

€70,35

Stator D6-3 PFT Twister D6-3 Twister Stator for PFT Plastering Machines Made in Germany The D6-3 PFT Twister Stator is a high-quality replacement s...

View full details

Rotor D6-3 Eco

€51,24 - €51,24

€51,24

€51,24 - €51,24

€51,24

Rotor D6-3 Eco – High-Alloy Tool Steel The Rotor D6-3 Eco is a durable and cost-effective rotor designed for professional rotor stator pump systems...

View full details

Stator D6-3 Eco

€50,40 - €50,40

€50,40

€50,40 - €50,40

€50,40

Stator D6-3 Eco – Maintenance-Free The Stator D6-3 Eco is a maintenance-free stator designed for professional rotor stator pump systems used in pla...

View full details

Stator D5-2.5 ECO

€71,40 - €71,40

€71,40

€71,40 - €71,40

€71,40

Stator D5-2.5 ECO Pink Stator with Integrated Clamp for D5-2.5 ECO Screw Pump Also known as m-tec Ecostar Made in Germany The D5-2.5 ECO Stator, ...

View full details

The Ülzener Putzknecht S48 is a mixing pump for all machine-applicable dry mortars, ready-mixed plasters and flowing screed. Here you find its spare and wear parts: mixing shafts, the conveying worm, pump flanges and tension anchors, the UE 45/7 pump for screed, the Handy K2 compressor, water fittings, wheels and electrical parts. Where we have the Ülzener part number, the product page shows it, so you can check it against your machine's parts list.

Not sure which part you need? Send us the model (S48, S48.3 or S48 easy), the serial number and a photo of the old part, and we'll confirm it before you order. Contact our team.

Rotor stators and flanges for the Putzknecht S48

The S48.3 leaves the factory with the UE 4 silver pump. The S48 also takes every D-series rotor stator and the UE 45/7. The pump sits at the end of the mixing shaft and decides the output and the material you can convey.

D4-1/2 and D4-1/4: lower output, for fine products and precise work.
D6-3: the most common plaster pump, also as "Drill", ECO and PFT Twister versions.
D8-2, D7-2.5: in between.
D8-1.5: higher output, less pressure.
UE 45/7: for flowing screed and high volumes.

The UE 45/7 needs the larger UE 45/7 suction flange (Ülzener 048.03.825). With it, the S48 pumps up to 50 l/min. Buy the rotor and stator as a set, or just the part that is worn. Not sure which size suits your material? Tell us what you pump and we'll recommend one.

Spare parts for every assembly of the Putzknecht S48

Mixing: the standard "Super" mixing shaft (Ülzener 048.03.012, sold as mixing spiral VR 8 / S 48, 550 mm), and mixing shafts for scratch render and insulating plaster.
Material feed: the standard conveying worm (048.02.005), the driver claw 25 or 30 mm (30 mm: 048.03.004) and the driving bush.
Pump end: the pressure flange for D pumps, the pressure flange with tension anchors MT 35, the tension anchor set M16 x 400 mm and the UE 45/7 suction flange (048.03.825).
Water: flow meters 150-1500 l/h and 160-1600 l/h.
Compressed air: the Handy K2 compressor, its air filter and cylinder head.
Electrics: the pole reverse switch and the 42 V control transformer.
Chassis: the wheel with brake and the guide rollers with and without brake.
Cleaning: the cleaning shaft (048.08.012) and the mixing tube cleaner (048.08.011).
Silo feeding: the complete injection hood (102.05.001.1) for pneumatic feeding.

The numbers in brackets are Ülzener part numbers from the official S48.3 and S48 easy parts list. Older S48 machines share most parts, but check the number on yours.

Wear parts to keep in stock

On a mixing pump, the parts that wear fastest touch the material: the stator and rotor, the mixing shaft and the conveying worm. How fast depends on the material. Coarse, abrasive plasters and screeds wear them much faster than fine products. If your S48 runs every day, a spare stator, a mixing shaft and a driver claw on the van can save a day on site.

About the Ülzener Putzknecht S48

The Putzknecht S48 has been built for more than 30 years, and the S48.3 and S48 easy are its current versions. It mixes and pumps plaster, render, adhesive and reinforcing mortar, insulating plaster and flowing screed, with a grain size of up to 8 mm depending on the pump. A 5.5 kW pump motor and a 1.1 kW feed screw motor run on 400 V/50 Hz. It delivers 5-30 l/min for plaster and up to 50 l/min for flowing screed, at up to 30 bar and up to 40 m conveying distance. It needs at least 3 bar water pressure. Spray air comes from a Handy K2 compressor with pressure switch. The pump outlet has an SKM 35 coupling with a mortar pressure gauge. With the injection hood, the S48 can be fed automatically from a silo. In size and function it is close to the PFT G4 and the Putzmeister MP 25. For other Ülzener machines, see our Ülzener collection.

Frequently Asked Questions About Ülzener Putzknecht S48 Spare Parts

Which rotor stator fits the Ülzener Putzknecht S48?

The S48.3 comes with the UE 4 silver pump. The machine also takes every D-series rotor stator and the UE 45/7. The UE 45/7 needs the larger suction flange 048.03.825. The D6-3 is the most common plaster pump. The D8-1.5 gives higher output at less pressure; for flowing screed and high volumes, choose the UE 45/7.

How do I find the right part number for my S48?

Ülzener part numbers for the S48 start with 048, for example 048.02.005 for the conveying worm. You find them in the spare parts list of your operating manual. The S48, S48.3 and S48 easy differ in some assemblies, so tell us which one you have. If you can't find the number, send us the serial number and a photo of the old part, and we'll identify it.

Do you ship S48 parts outside Germany?

Yes. We ship from Berlin across Europe and internationally.

Are these original Ülzener parts?

Some are original Ülzener parts, others are replacement parts made to fit the S48. Where we have the Ülzener part number, the product page shows it.

Which compressor does the S48 use?

The Handy K2 compressor, 400 V, with pressure switch. We stock the K2 compressor, its air filter and its cylinder head.

Are the prices net?

Yes. All prices are net, excluding VAT. For larger quantities or dealer orders, ask us for a quote.

YOU HAVE A QUESTION?

Contact us

Write to us if you have any questions or inquiries. We are also happy to assist you with technical questions.

info@putzparts24.de

+49 (0) 30 30807300

Language

Ülzener Putzknecht S48 Spare Parts

Rotor stators and flanges for the Putzknecht S48

Spare parts for every assembly of the Putzknecht S48

Wear parts to keep in stock

About the Ülzener Putzknecht S48

Frequently Asked Questions About Ülzener Putzknecht S48 Spare Parts

Contact us